作者： |

macOS 下用 Clion和OpenOCD开发 STM32(st-link和STM32CubeMX) – 简书

  1. 安装编译器：arm-gcc-none-eabi-gcc
➜  ~ brew cask install gcc-arm-embedded

==> Satisfying dependencies
==> Downloading https://developer.arm.com/-/media/Files/downloads/gnu-rm/7-2017q4/gcc-arm-none-eabi-7-2017-q4-major-mac.tar.bz2
######################################################################## 100.0%
==> Verifying checksum for Cask gcc-arm-embedded
==> Installing Cask gcc-arm-embedded
==> Linking Binary 'arm-none-eabi-strip' to '/usr/local/bin/arm-none-eabi-strip'.
==> Linking Binary 'arm-none-eabi-ar' to '/usr/local/bin/arm-none-eabi-ar'.
==> Linking Binary 'arm-none-eabi-as' to '/usr/local/bin/arm-none-eabi-as'.
==> Linking Binary 'arm-none-eabi-c++' to '/usr/local/bin/arm-none-eabi-c++'.
==> Linking Binary 'arm-none-eabi-c++filt' to '/usr/local/bin/arm-none-eabi-c++filt'.
==> Linking Binary 'arm-none-eabi-cpp' to '/usr/local/bin/arm-none-eabi-cpp'.
==> Linking Binary 'arm-none-eabi-elfedit' to '/usr/local/bin/arm-none-eabi-elfedit'.
==> Linking Binary 'arm-none-eabi-g++' to '/usr/local/bin/arm-none-eabi-g++'.
==> Linking Binary 'arm-none-eabi-gcc' to '/usr/local/bin/arm-none-eabi-gcc'.
==> Linking Binary 'arm-none-eabi-gcc-ar' to '/usr/local/bin/arm-none-eabi-gcc-ar'.
==> Linking Binary 'arm-none-eabi-gcc-nm' to '/usr/local/bin/arm-none-eabi-gcc-nm'.
==> Linking Binary 'arm-none-eabi-gcc-ranlib' to '/usr/local/bin/arm-none-eabi-gcc-ranlib'.
==> Linking Binary 'arm-none-eabi-gcov' to '/usr/local/bin/arm-none-eabi-gcov'.
==> Linking Binary 'arm-none-eabi-gcov-tool' to '/usr/local/bin/arm-none-eabi-gcov-tool'.
==> Linking Binary 'arm-none-eabi-gdb' to '/usr/local/bin/arm-none-eabi-gdb'.
==> Linking Binary 'arm-none-eabi-gdb-py' to '/usr/local/bin/arm-none-eabi-gdb-py'.
==> Linking Binary 'arm-none-eabi-gprof' to '/usr/local/bin/arm-none-eabi-gprof'.
==> Linking Binary 'arm-none-eabi-ld' to '/usr/local/bin/arm-none-eabi-ld'.
==> Linking Binary 'arm-none-eabi-ld.bfd' to '/usr/local/bin/arm-none-eabi-ld.bfd'.
==> Linking Binary 'arm-none-eabi-nm' to '/usr/local/bin/arm-none-eabi-nm'.
==> Linking Binary 'arm-none-eabi-objcopy' to '/usr/local/bin/arm-none-eabi-objcopy'.
==> Linking Binary 'arm-none-eabi-objdump' to '/usr/local/bin/arm-none-eabi-objdump'.
==> Linking Binary 'arm-none-eabi-ranlib' to '/usr/local/bin/arm-none-eabi-ranlib'.
==> Linking Binary 'arm-none-eabi-readelf' to '/usr/local/bin/arm-none-eabi-readelf'.
==> Linking Binary 'arm-none-eabi-size' to '/usr/local/bin/arm-none-eabi-size'.
==> Linking Binary 'arm-none-eabi-strings' to '/usr/local/bin/arm-none-eabi-strings'.
==> Linking Binary 'arm-none-eabi-addr2line' to '/usr/local/bin/arm-none-eabi-addr2line'.
  gcc-arm-embedded was successfully installed!
➜  ~ arm-none-eabi-gcc --version
arm-none-eabi-gcc (GNU Tools for Arm Embedded Processors 7-2017-q4-major) 7.2.1 20170904 (release) [ARM/embedded-7-branch revision 255204]
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
➜  ~ which arm-none-eabi-gcc 
/usr/local/bin/arm-none-eabi-gcc

How I installed GCC ARM on my Mac 10.9 Mac Book Pro

  1. 安装下载调试器：st-link

➜  u-boot-2016.05 brew install stlink
Updating Homebrew...
==> Auto-updated Homebrew!
==> Downloading https://homebrew.bintray.com/bottles/stlink-1.4.0.el_capitan.bottle.tar.gz
######################################################################## 100.0%
==> Pouring stlink-1.4.0.el_capitan.bottle.tar.gz
  /usr/local/Cellar/stlink/1.4.0: 27 files, 702KB
➜  u-boot-2016.05 st-info --version
v1.4.0
➜  ~ st-info --flash
0x80000
➜  ~ st-info --version 
v1.4.0
➜  ~ st-info --flash  
➜  ~ st-info --chipid
0x0433
➜  ~ st-info --serial
303636454646343934393531373835
➜  ~ st-flash 
invalid command line
stlinkv1 command line: ./st-flash [--debug] [--reset] [--format <format>] [--flash=<fsize>] {read|write} /dev/sgX <path> <addr> <size>
stlinkv1 command line: ./st-flash [--debug] /dev/sgX erase
stlinkv2 command line: ./st-flash [--debug] [--reset] [--serial <serial>] [--format <format>] [--flash=<fsize>] {read|write} <path> <addr> <size>
stlinkv2 command line: ./st-flash [--debug] [--serial <serial>] erase
stlinkv2 command line: ./st-flash [--debug] [--serial <serial>] reset
                       Use hex format for addr, <serial> and <size>.
                       fsize: Use decimal, octal or hex by prefix 0xXXX for hex, optionally followed by k=KB, or m=MB (eg. --flash=128k)
                       Format may be 'binary' (default) or 'ihex', although <addr> must be specified for binary format only.
                       ./st-flash [--version]
➜  ~ st-flash erase 
st-flash 1.4.0
2017-12-31T17:30:22 INFO src/common.c: Loading device parameters....
2017-12-31T17:30:22 INFO src/common.c: Device connected is: F4 device (Dynamic Efficency), id 0x10006433
2017-12-31T17:30:22 INFO src/common.c: SRAM size: 0x18000 bytes (96 KiB), Flash: 0x80000 bytes (512 KiB) in pages of 16384 bytes
Mass erasing......
  1. 新建跑马灯例程：STM32CubeMX

3.1 下载安装 STM32CubeMX 后，New Project新建 NUCLEO-F401RE 工程，选择板子或者芯片型号：

选择板子或者芯片型号

3.2 Boards List中选中的板子，双击打开配置界面，根据 UM1724 文档 的 6.4 小节可以看到，LED2为 PA5。如果之前是选择的板子，那么Cube就已经帮你设定好了；如果选择的时芯片，那么自己标记一下就可以了。

LD2

3.2 保存配置，并生成工程和代码

选择 Makefile
工程文件结构

3.3 进入工程所在根目录，make工程，并修复 Cube 的自动生成的一些 Makefile 的错误。

错误一：没有指定 arm-none-eabi-gcc完整路径，提示找不到编译器

➜  0_blinking make
mkdir build
/arm-none-eabi-gcc -c -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -DUSE_HAL_DRIVER -DSTM32F401xE -IInc -IDrivers/STM32F4xx_HAL_Driver/Inc -IDrivers/STM32F4xx_HAL_Driver/Inc/Legacy -IDrivers/CMSIS/Device/ST/STM32F4xx/Include -IDrivers/CMSIS/Include -Og -Wall -fdata-sections -ffunction-sections -g -gdwarf-2 -MMD -MP -MF"build/stm32f4xx_hal_gpio.d" -MT"build/stm32f4xx_hal_gpio.d" -Wa,-a,-ad,-alms=build/stm32f4xx_hal_gpio.lst Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c -o build/stm32f4xx_hal_gpio.o
/bin/sh: /arm-none-eabi-gcc: No such file or directory
make: *** [build/stm32f4xx_hal_gpio.o] Error 127

修复一：添加 BINPATH路径，可以用which arm-none-eabi-gcc 查看确认


#######################################
# binaries
#######################################
BINPATH = /usr/local/bin/
PREFIX = arm-none-eabi-
CC = $(BINPATH)/$(PREFIX)gcc
AS = $(BINPATH)/$(PREFIX)gcc -x assembler-with-cpp
CP = $(BINPATH)/$(PREFIX)objcopy
AR = $(BINPATH)/$(PREFIX)ar
SZ = $(BINPATH)/$(PREFIX)size
HEX = $(CP) -O ihex
BIN = $(CP) -O binary -S

错误二：多次引用源代码，导致链接时重复

➜  0_blinking make
/usr/local/bin//arm-none-eabi-gcc -c -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -DUSE_HAL_DRIVER -DSTM32F401xE -IInc -IDrivers/STM32F4xx_HAL_Driver/Inc -IDrivers/STM32F4xx_HAL_Driver/Inc/Legacy -IDrivers/CMSIS/Device/ST/STM32F4xx/Include -IDrivers/CMSIS/Include -Og -Wall -fdata-sections -ffunction-sections -g -gdwarf-2 -MMD -MP -MF"build/stm32f4xx_hal_gpio.d" -MT"build/stm32f4xx_hal_gpio.d" -Wa,-a,-ad,-alms=build/stm32f4xx_hal_gpio.lst Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c -o build/stm32f4xx_hal_gpio.o
············
build/stm32f4xx_hal_msp.o: In function `HAL_MspInit':
/Users/linjinhui/workplace/stm32f401re/0_blinking/Src/stm32f4xx_hal_msp.c:50: multiple definition of `HAL_MspInit'
build/stm32f4xx_hal_msp.o:/Users/linjinhui/workplace/stm32f401re/0_blinking/Src/stm32f4xx_hal_msp.c:50: first defined here
build/main.o: In function `_Error_Handler':
/Users/linjinhui/workplace/stm32f401re/0_blinking/Src/main.c:222: multiple definition of `_Error_Handler'
build/main.o:/Users/linjinhui/workplace/stm32f401re/0_blinking/Src/main.c:222: first defined here
build/main.o: In function `SystemClock_Config':
/Users/linjinhui/workplace/stm32f401re/0_blinking/Src/main.c:113: multiple definition of `SystemClock_Config'
build/main.o:/Users/linjinhui/workplace/stm32f401re/0_blinking/Src/main.c:113: first defined here
build/main.o: In function `main':
/Users/linjinhui/workplace/stm32f401re/0_blinking/Src/main.c:68: multiple definition of `main'
build/main.o:/Users/linjinhui/workplace/stm32f401re/0_blinking/Src/main.c:68: first defined here
build/stm32f4xx_it.o: In function `SysTick_Handler':
/Users/linjinhui/workplace/stm32f401re/0_blinking/Src/stm32f4xx_it.c:52: multiple definition of `SysTick_Handler'
build/stm32f4xx_it.o:/Users/linjinhui/workplace/stm32f401re/0_blinking/Src/stm32f4xx_it.c:52: first defined here
collect2: error: ld returned 1 exit status
make: *** [build/0_blinking.elf] Error 1

修复二：去除C_SOURCES中重复的源文件（注：去除后面那个多出来的，具体是stm32f4xx_it.c，stm32f4xx_hal_msp.c，main.c），修改完如下

######################################
# source
######################################
# C sources
C_SOURCES =  \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c \
Src/stm32f4xx_it.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c \
Src/stm32f4xx_hal_msp.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c \
Src/main.c \
Src/system_stm32f4xx.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c \
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c

再次make，成功在build子目录下编译出文件显示如下：

➜  0_blinking make
/usr/local/bin//arm-none-eabi-gcc -c -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -DUSE_HAL_DRIVER -DSTM32F401xE -IInc -IDrivers/STM32F4xx_HAL_Driver/Inc -IDrivers/STM32F4xx_HAL_Driver/Inc/Legacy -IDrivers/CMSIS/Device/ST/STM32F4xx/Include -IDrivers/CMSIS/Include -Og -Wall -fdata-sections -ffunction-sections -g -gdwarf-2 -MMD -MP -MF"build/stm32f4xx_hal_gpio.d" -MT"build/stm32f4xx_hal_gpio.d" -Wa,-a,-ad,-alms=build/stm32f4xx_hal_gpio.lst Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c -o build/stm32f4xx_hal_gpio.o
.............
/usr/local/bin//arm-none-eabi-size build/0_blinking.elf
   text    data     bss     dec     hex filename
   4280      12    1572    5864    16e8 build/0_blinking.elf
/usr/local/bin//arm-none-eabi-objcopy -O ihex build/0_blinking.elf build/0_blinking.hex
/usr/local/bin//arm-none-eabi-objcopy -O binary -S build/0_blinking.elf build/0_blinking.bin

用st-flash下载跑马灯：

➜  0_blinking st-flash write ./build/0_blinking.bin 0x8000000
st-flash 1.4.0
2018-01-07T22:49:52 INFO src/common.c: Loading device parameters....
2018-01-07T22:49:52 INFO src/common.c: Device connected is: F4 device (Dynamic Efficency), id 0x10006433
2018-01-07T22:49:52 INFO src/common.c: SRAM size: 0x18000 bytes (96 KiB), Flash: 0x80000 bytes (512 KiB) in pages of 16384 bytes
2018-01-07T22:49:52 INFO src/common.c: Attempting to write 4204 (0x106c) bytes to stm32 address: 134217728 (0x8000000)
Flash page at addr: 0x08000000 erased
2018-01-07T22:49:52 INFO src/common.c: Finished erasing 1 pages of 16384 (0x4000) bytes
2018-01-07T22:49:52 INFO src/common.c: Starting Flash write for F2/F4/L4
2018-01-07T22:49:52 INFO src/flash_loader.c: Successfully loaded flash loader in sram
enabling 32-bit flash writes
size: 4204
2018-01-07T22:49:52 INFO src/common.c: Starting verification of write complete
2018-01-07T22:49:52 INFO src/common.c: Flash written and verified! jolly good!

哦，没反应，忘了翻转了，还有，另外不要忘了跳冒要接好，，，
修改main函数中while(1)，翻转起来：

    /* Infinite loop */
    /* USER CODE BEGIN WHILE */
    while (1)
    {
        /* USER CODE END WHILE */

        /* USER CODE BEGIN 3 */
        HAL_GPIO_WritePin(LD2_GPIO_Port, LD2_Pin, GPIO_PIN_RESET);
        HAL_Delay(500);
        HAL_GPIO_WritePin(LD2_GPIO_Port, LD2_Pin, GPIO_PIN_SET);
        HAL_Delay(500);

    }

再次编译和下载，闪起来了，，，

  1. 在线仿真调试 IDE：CLion+OpenOCD

5.1 安装 OpenOCD：brew install openocd

➜  ~ brew install openocd --enable_ft2232_libftdi --enable_stlink
Updating Homebrew...
==> Auto-updated Homebrew!
Updated 4 taps (caskroom/cask, caskroom/versions, homebrew/core, homebrew/science).
==> New Formulae
opencascade
Warning: open-ocd: this formula has no --enable_ft2232_libftdi option so it will be ignored!
Warning: open-ocd: this formula has no --enable_stlink option so it will be ignored!
==> Downloading https://homebrew.bintray.com/bottles/open-ocd-0.10.0.el_capitan.bottle.1.tar.gz
######################################################################## 100.0%
==> Pouring open-ocd-0.10.0.el_capitan.bottle.1.tar.gz
  /usr/local/Cellar/open-ocd/0.10.0: 632 files, 4.7MB
➜  ~ which openocd  
/usr/local/bin/openocd
➜  ~ openocd        
Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
    http://openocd.org/doc/doxygen/bugs.html
embedded:startup.tcl:60: Error: Can't find openocd.cfg
in procedure 'script' 
at file "embedded:startup.tcl", line 60
Error: Debug Adapter has to be specified, see "interface" command
embedded:startup.tcl:60: Error: 
in procedure 'script' 
at file "embedded:startup.tcl", line 60

5.2 CLion 及其插件

如果要Debug，则需要重新用Cube生成SW4STM32，如下：

SW4STM32

安装 CLion 及其插件clion-embedded-arm后，导入刚才 Cube 生成的工程：

导入工程
勾选文件

CLion 会自动生成 CMakeLists.txt：

image.png

用插件生成CMakeLists.txt来替换原来的CMakeLists.txt：

image.png
image.png

此时，选择Run->Build显示编译成功如下：

image.png

配置 OpenOCD 如下：

image.png

注：

  1. OpenOCD目前一定要符合完整结构，见 Issue 那么之前安装的不就没啥用了，汗，不过作者也在重新考虑是否需要完整的目录结构，因为好多人碰到这个问题了。
  2. 去掉自带的 GDB，否则提示错误格式，见Issue
  3. macOS和Linux下，Toolchains选项和CMake选项默认不用修改，Windows需要安装 MinGW 或者 Cygwin。

然后，就可以愉快的 Debug 在线仿真了，，，

Debug

参考链接

作者：Mintisan
链接：https://www.jianshu.com/p/ed7203324ac6
来源：简书
著作权归作者所有。商业转载请联系作者获得授权，非商业转载请注明出处。

发表于

发表评论

评论

此站点使用Akismet来减少垃圾评论。了解我们如何处理您的评论数据。